Weight: 0.74
Manufacturer: Netgear
Quantity: 22
|
|
The ProSafe FS108P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power
when PoE devices are disconnected. Easy and reliable, the ProSafe FS108P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink™.
The affordably priced ProSafe FS108P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS108P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.
| Data transmission |
| Maximum data transfer rate |
0.1Gbit/s |
| Latency |
> 20 µs for 64-byte frames |
| Switching capacity |
1.6Gbit/s |
Networking |
| Address table size |
1000entries |
| Store-and-forward |
Store-and-forward |
Protocols |
| Data link protocol |
IEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x Flow Control, IEEE 802.3af DTE Power via MDI |
Connectivity |
| Ports quantity |
8 |
| Cabling technology |
PoE over a 1 x Cat-5 cable |
| I/O ports |
8 x auto speed-sensing 10/100 RJ-45. |
Memory |
| Drive device, buffer size |
0.096MB |
Weight & dimensions |
| Dimensions W x D x H |
235 x 103 x 27mm |
| Weight |
740g |
Energy management |
| Power consumption |
44W |
| Power requirements |
48VDC, 0.8A |
Endurance |
| Mean time between failures (MTBF) |
190000h |
Certificates |
| Compliance industry standards |
IEEE 802.3af |
| Safety |
CE mark, commercial; CE/LVD EN60950 |
| Electromagnetic emissions |
CE mark, commercial; FCC Part 15 Class B; VCCI Class B; EN 55022 (CISPR 22), Class B; C-Tick |
Environmental conditions |
| Operating altitude |
3000m |
| Operating relative humidity range |
0-90% |
| Storage temperature range (T-T) |
-10-70°C |
| Operating temperature range (T-T) |
0 - 40°C |
Illumination/Alarms |
| LED indicators |
System: Power, PoE Maximum Power; Per Port: Link, Activity, Speed, PoE Active, PoE Fault |
|
