Weight: 0.30
Manufacturer: Cisco
|
|
The Cisco 585 CPE has four switched Fast Ethernet ports allowing customers to connect multiple devices simultaneously. The 585 CPE also has two RJ-11 connectors: one for an analog phone and one for the LRE link (same as the 575 LRE). A section of the top of the 585 CPE is indented to allow customers to place customized labels, and the mounting templates on both the 585 CPE and 575 CPE are identical allowing customers to easily replace existing 575 CPEs mounted under desks with Cisco 585 CPEs.
The 585 CPE is targeted towards customers who intend to deliver converged voice, video, and data services to several devices such as computers, set-top boxes, IP phones, wireless access points, etc. In order to support converged services such as voice-over-IP and video-on-demand, the 585 CPE supports 802.1p Quality of Service (QoS) with two priority queues (threshold fixed at Class of Service [CoS] value of four) allowing voice and video traffic to be prioritized over normal data traffic. There are two queues on the switch inside the 585 CPE, and if tagged traffic is received on a Fast Ethernet port it will be placed in the high or low priority queue based upon tag. The 585 CPE does not tag any packets, and the individual Fast Ethernet ports cannot be on separate VLANs.
The 585 CPE supports Private VLAN Edge that isolates the Fast Ethernet ports ensuring that traffic travels directly from the entry point to the aggregation device through a virtual path and cannot be directed to another CPE Fast Ethernet port. The speed of the four Fast Ethernet ports is set to auto-negotiate, and the duplex is set at half. The CPE Ethernet ports can be enabled or disabled on a per-port basis when used in conjunction with the Catalyst 2950 LRE switches but not the Catalyst 2900 LRE XL switches.
| Data transmission |
| Data transfer rate (max) |
100Mbit/s |
Networking |
| Data link protocol |
Ethernet, Fast Ethernet |
| Networking features |
LRE, Ethernet |
Connectivity |
| Interface |
RJ-45, RJ-11 |
| Connectivity technology |
Wired |
| Cabling technology |
10Base-T, 100Base-TX |
| I/O ports |
4x RJ-45 Fast Ethernet Port\n2x RJ-11 Telephony ports\nAC/DC Adapter Power Port |
Endurance |
| Mean time between failures (MTBF) |
990961 hoursh |
Certificates |
| Compliance industry standards |
IEEE 802.3x, IEEE 802.1p, IEEE 802.3, IEEE 802.3u |
| Electromagnetic emissions |
FCC Part 15 Class, EN 55022 Class B (CISPR 22 Class B), VCCI Class B, AS/NZS 3548 Class B, CE Mark, BCIQ, CCC |
Energy management |
| Power requirements |
100 to 240 VAC, 50 to 60 Hz |
Management features |
| Management protocols |
RMON |
| LED indicators |
READY-CPE, ETH1, ETH2, ETH3, ETH4, Power |
Environmental conditions |
| Operating temperature range (T-T) |
0 - 45°C |
| Operating relative humidity range |
10-85% |
| Operating altitude |
3000m |
| Storage temperature range (T-T) |
-25-70°C |
Weight & dimensions |
| Dimensions W x D x H |
150x173x43.2mm |
| Weight |
300g |
|
